16S1P-51.2V100Ah Rock Mounted Battery

Short Description:

The Energy storage pack is an essential component of the photovoltaic power generation system. It can provide electricity for the connected load, and it can also store photovoltaic solar modules, fuel generators, or wind energy generators by charging the remaining energy in case of emergency. When the sun goes down, energy demand is high, or there is a power outage, you can use the energy stored in the system to meet your energy needs at no additional cost. In addition, the energy storage Pack can help you achieve energy self-consumption and ultimately achieve the goal of energy independence.

Send email to us

Product Detail

Product Tags

Product Introduction

According to different power conditions, the energy storage PACK can output power during peak power consumption, and can also store energy during low power consumption. Therefore, when connecting the matching photovoltaic modules or inverter arrays, external equipment is required to match the energy storage the working parameters of the pack to achieve the highest operating efficiency. For a simple diagram of a typical energy storage system.

Product Details Display

1.Rock mountear:For battery pack mounting

2.Handle :Handle for carrier

3.Battery +:Terminal M6 screw

4.Reset :Emergency Reset

5.ADS :Battery address

6.LCD :Display battery information

7.Battery -:Terminal M6 screw

8.GND :GND Connection for safety

9.MCB :DC output

10.RUN :Run LED display

11.ALM :Alarm LED display

12.SOC :Capacity remaining display

13.CANBUS:Communication port with inverter

14.RS485A :Communication port with inverter

15.RS232::Communication port with PC

16.RS485B :Internal communication between packs

17.ON/OFF Switch:ON/OFF battery by software

Product Specification

PERFORMANCE SPECIFICATIONS
Model	TG-Rack/Box-5KWH
Nominal Voltage	51.2V
Cell model/Configuration	3.2V100Ah(ANC)/16S1P
Capacity(Ah)	100AH
Rated Energy(KWH)	5.12KWH
Usable Energy(KWH)	4.6KWH
Max.Charge/Discharge Current(A)	50A/100A
Voltage Range(Vdc)	48-56.5V
Scalability	Up to 10 parallel
Communication	RS232-PC.RS485(B)-BATRS485(A)-Inverter,Canbus-Inverter
Cycle Life	≥6000cycles@25C，90% DOD，60%EOL
Design Life	≥15 Years(25℃)
MECHANICAL SPECIFICATIONS
Weight(Approx)(KG)	48kg
Dimension(W/D/H)(mm)	483x480x133mm
Installation Mode	Stack
IP Grade	lp21
SECURITY AND CERTIFICATION
Safety(Pack)	UN38.3,MSDS.IEC62619(CB),CE-EMCUL1973
Safety(Cell)	UN38.3MSDS.IEC62619,CE,UL1973,UL2054
Protection	BMS,Breaker
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature(C)	Charge:-10C~50℃;Discharge:-20C-50℃
Altitude (m)	≤2000
Humidity	≤95%(Non-condensing)

Specification Details

Model	Product Size	Net Weight(KG)	Package Size(MM)	Gross Weight(KG)
16S1P(51.2V100AH）	480Lx483Wx133H	≈44.3	580Lx530Wx210H	≈47.3
15S2P(48V200AH)	680Lx483Wx178H	≈76.8	850Lx570Wx285H	≈84.3
16S2P’(51.2V200AH）	680Lx483Wx178H	≈81.6	850Lx570Wx285H	≈87.9
16S1P(51.2V100AH）	480Lx483Wx178H	≈45.1	585Lx535Wx240H	≈48.6
15S1P(48V100AH）	480Lx483Wx178H	≈43.2	585Lx535Wx240H	≈47.1